Planet Technology FGSW-2612PVS - Manual (Page 29)

- 29 -
4-7 QoS Configuration
This function provides QoS Configuration of Web Smart PoE Switch, the screen in Figure 4-29 appears and table 4-4 de-
scribes the QoS Configuration objects of Web Smart PoE Switch.
Figure 4-29 QoS Configuration Web Page screen
Object Description
QoS Mode Provide different modes for QoS Configuration, the available options are shown as below:
Disable QoS Priority,
High Empty Then Low,
Highest:secHigh:SecLow:Lowest=8:4:2:1
Highest:secHigh:SecLow:Lowest=15:7:3:1
Highest:secHigh:SecLow:Lowest=15:10:5:1
Default mode is Highest:secHigh:SecLow:Lowest=8:4:2:1, the screen in Figure 4-30 ap-
pears.
Static Port Ingress
Priority Allow to assign Ingress priority on each port of Web Smart PoE Switch, the available options
are OFF and 0-7. Default mode is 0 and the screen in
Figure 4-31 appears.
802.1p Priority [7-0] Allow assign high and low on each priority, the available options are shown as below:
Lowest, SecLow, SecHigh, Highest,
the screen in Figure 4-32 appears.
Apply button Press this button for save current QoS configuration of each port on Web Smart PoE Switch.
Table 4-4 Descriptions of the QoS Configuration screen Objects