Philips 8040X - Manual (Page 9)

ENGLISH
How To Shave With Razor
C
◗ This symbol on the razor indicates that the
razor can be used in the bath or shower.
◗ Make sure the power plug and charging stand
do not get wet or near water.
1 Make sure razor is charged and filled with
NIVEA FOR MEN shaving conditioner
(see ‘Charging’ & ‘Filling Razor Cartridge’
sections).
C
2 Remove Protective Razor Head Cap from
razor by sliding it off from the Razor
Head Assembly.
3 Wet your face and neck thoroughly with
warm water.
NOTE: This razor can be used similar to a razor
blade: you can use the razor on a wet face.
4 Turn razor ON by pressing the on/off
button once.
◗ If razor does not turn on immediately, check
to make sure the Travel Lock is not engaged.
C
5 Press the shaving conditioner button
to apply NIVEA FOR MEN shaving
conditioner to your skin. When you
release the button, the razor stops
dispensing lotion.
16 ENGLISH
The shaving conditioner button only works when
the razor is switched ON.
◗ If razor does not dispense shaving conditioner,
dried shaving conditioner may be blocking the
conditioner holes. Thoroughly clean razor (see
‘Cleaning’ section).
6 Gently move the shaving heads over your
skin. Shave against the direction of beard
growth using both straight and circular
motions.
This razor has no hair collection chamber to
capture stubble. To prevent stubble from falling,
apply sufficient shaving conditioner while shaving.
C
7 While shaving, press the shaving
conditioner button frequently to
apply more NIVEA FOR MEN shaving
conditioner so that the razor keeps gliding
smoothly over your face.
The shaving conditioner provides immediate
hydrating action and lessens drag or pull against
skin.
8 Easy does it. Gently press the razor to
your skin so the floating heads can follow
the contours of your face. DO NOT press
too hard. Too much pressure can pinch the
skin into the combs.
◗ For best shaving results, shaving conditioner
should be applied frequently.
17