Philips 8040X - Manual (Page 11)

ENGLISH
4 Turn razor OFF when finished.
5 Thoroughly clean trimmer after using
(see ‘Cleaning’).
To Remove Trimmer:
1 Turn razor OFF.
2 Take the trimmer off the razor by pulling
straight up away from the razor. Place
trimmer back into the trimmer storage
compartment on the charging stand.
C
3 Replace Razor Head Assembly back on
razor and push down (you will hear a
click).
The Razor Head Assembly will only fit correctly
in one position on razor. Make sure to align the
2 shaving lotion dispensing holes on the Razor
Head Assembly with the 2 shaving lotion tubes on
the razor.
C
4 Put Protective Razor Head Cap on the
razor.
C
5 You may store your razor in the charging
stand. Unplug from the outlet when
charging is complete.
20 ENGLISH
Travel Lock
If you are going to store the razor for a longer
time period or if you are going to travel, it is
possible to lock the razor. The travel lock prevents
the razor from being switched on by accident.
Activating the travel lock
1 Turn razor OFF.
2 Press and hold the shaving conditioner
button.
3 Press the on/off button with your other
hand.
4 Hold both buttons for a few seconds until
razor makes a brief humming sound and
the top charging light blinks a few times.
The travel lock has now been activated.
B
If the on/off button is accidentally pressed first, the
razor will turn ON. Press again to turn off razor.
Deactivating the travel lock
1 Turn razor OFF.
2 Press and hold the shaving conditioner
button.
21