beautypg.com

Safety instructions, Important installation information – Philips SDV2950/27 User Manual

Page 4

background image

4

EN

Safety Instructions

Outdoor antennas should be grounded with an approved lighting arrest-

ing device.Local codes may apply. Use 8 AWG or larger ground wire.

Height or other restrictions on antennas may apply to your installa-

tion depending on your proximity to an airport, or local ordinances.

Take the time to plan your installation procedure. Do all assembly

work on the antenna on the ground. Raise the completed antenna

after assembly.

Do NOT work on a wet, snowy or windy day or if a thunderstorm is

approaching. Do NOT use a metal ladder.

If the antenna assembly starts to fall, get away from it and let it fall.

Remember that the antenna mast and cable are all excellent conduc-

tors of electrical current.

Do NOT install the antenna by yourself. Be sure that there are two

other people available for help.

If any part of the antenna should come in contact with a power line.

DON'T TOUCH IT OR TRY TO REMOVE IT YOURSELF. Call your

local power company immediately.They will remove it.

Should an electrical accident occur ...DON'T TOUCH THE PERSON

IN CONTACT WITH THE POWER LINE, or you too can become

electrocuted. Instead, use a DRY board, stick, or rope to push or pull

the victim away from the power lines and antenna. Once clear, check

the victim. If he has stopped breathing, immediately administer car-

diopulmonary resuscitation (CPR) and stay with him. Have someone

else call for medical help.

Install wire antennas high enough that they will not be "walked into"

by people.

Do not install antenna wire(s) over or under utility lines.

Important installation information

The SDV2950 uses a power injector that sends a low power DC volt-

age to the antenna to drive the signal amplifier built into the antenna

though the RG-6 or RG-59 signal cable.

It is essential for proper operation of this antenna system that the

power injector be connected between the antenna and any devices

such as splitters, additional amplifers, matching transformers,

networks, etc. SEE DIAGRAM TO LEFT.

Disregarding this important notice may result in damaging the power

injector or improper operation / poor performance.

This manual is related to the following products: