Peavey PR 10P - Manual (Page 5)

5
((11)) FFU US SE E
The unit is AC power line fuse protected from overloads and fault conditions with an ABC-type fast-blow 5
Amp fuse. This fuse is located within the cap of the fuse holder. If the fuse fails, THE FUSE MUST BE
REPLACED WITH THE SAME TYPE AND VALUE IN ORDER TO AVOID DAMAGE TO THE EQUIPMENT AND TO
PREVENT VOIDING THE WARRANTY. If the unit repeatedly blows fuses, it should be taken to a qualified
service center for repair.
((2 2)) IIE EC C P PO OW WE ER R C CO OR RD D C CO ON NN NE EC CT TIIO ON N
This receptacle is for the IEC line cord (supplied) that provides AC power to the unit.
Never break off the ground pin on any equipment. It is provided for your safety. If the outlet
used does not have a ground pin, a suitable grounding adapter should be used and the third
wire should be grounded properly. To prevent the risk of shock or fire hazard, always be sure
that the mixer and all other associated equipment are properly grounded.
((3 3)) O ON N--O OFFFF S SW WIIT TC CH H
This rocker switch supplies AC power to the PR 10P when switched to the ON position.
A Ap pp plliicca attiio on nss
The Peavey PR ™ 10P has a variety of applications such as sound reinforcement, public address, side fill
system, karaoke or musical playback. With the optional monitor stand kit, the Peavey PR 10P makes an
excellent stage monitor.
A typical signal source for the line-level inputs of the Peavey PR 10P would be a sound reinforcement
mixing console (mixer) or the output from a CD player, Minidisc player or tape deck. A dynamic
microphone can be connected and used as well.
R R E E A A R R P P A A N N E E LL
1 3 2