Peavey DTH 4210f - Manual

S P E C I F I C A T I O N S
SPECIFICATIONS
Frequency Response, 1 Meter
On-Axis, Swept-Sine in Anechoic
Environment:
115 Hz to 16 kHz
Low-Frequency Cut-Off (-3 dB point):
115 Hz
Usable Low-Frequency Limit
(-10 dB point):
90 Hz
Power Handling:
Full Range:
400 W continuous (40 V RMS)
800 W program
1,600 W peak
Bi-amp Low:
450 W continuous (40V RMS)
800 W program
1,600 W peak
Bi-amp High:
80 W continuous (25.3 V RMS)
160 W program
320 W peak
Sound Pressure Level, 2.8 V (1 watt) •
1 Meter in Anechoic Environment:
101 dB (Full Range)
103 dB (Bi-amp)
Maximum Sound Pressure Level:
127 dB (Full Range)
Radiation Angle Measured at -6 dB
Point of Polar Response:
500 Hz to 1.6 kHz:
Horizontal: 72
° ±
19
°
Vertical: 63
° ±
20
°
1.6 kHz to 5 kHz:
Horizontal: 75
° ±
8
°
Vertical: 54
° ±
20
°
5 kHz to 16 kHz:
Horizontal: 54
° ± 17 °
Vertical: 37 ° ± 6 °
Directivity Factor, Q (Mean):
18.5
±
13.6
Directivity Index, Di (Mean):
11.9 dB
±
2.4 dB
Transducer Complement:
Two SP 10825 Scorpion ® Plus drivers
One 44XT ™ compression driver coupled to
a CH ® -7 constant directivity horn
Crossover Frequency:
2 kHz
Time Offset:
0.67 mS (delay lows)
Impedance (Z):
4 ohms nominal
3.2 ohms minimum
Input Connections:
Two Neutrik ® four-conductor Speakon ®
connectors (NL4MD-V-1)
Enclosure Materials and Finish:
3/4" plywood with polyurethane coating
and powder coated metal grille with
black polyester foam overlay
Dimensions (H x W x D):
46.375" x 18.75" front (9" rear) x 29.25"
( 117.8 cm x 48.26 cm front (22.9 cm rear)
x 74.3 cm)
Net Weight:
158 lbs. (71.67 kg)
FEATURES
• “Lockable” mode select switch
• 44XT
™ compression driver
• Anti-axial, mid-bass driver
arrangement
• Dual SP10825 Scorpion
® Plus drivers
• High power-handling, polypropylene
capacitors
DTH ® 4210f
Minimum-Profile
Loudspeaker