Panasonic AK-HC1500G - Manual (Page 49)

- 48 (E) -
ENGLISH
Setting of menu items
Scene file items indicated by “”
MAINTENANCE 12.COLOR CORRECTION R SAT/PHASE 
Mg SAT/PHASE 
B SAT/PHASE 
Cy SAT/PHASE 
G SAT/PHASE 
Yl SAT/PHASE 
R_Mg SAT/PHASE 
Mg_B SAT/PHASE 
B_Cy SAT/PHASE 
Cy_G SAT/PHASE 
G_Yl SAT/PHASE 
Yl_R SAT/PHASE 
SETTING 1.MODE D5600K 
LIGHTING 
GAIN SELECT *1
CAMERA ID 
CAMERA ID POSI 
MATRIX TABLE 
COLOR CORRECT 
DIGITAL EXTENDER 
BAR SELECT 
FORMAT 
STATUS 
MENU ON ABB 
MENU SEL 
FAN 
2.SHUTTER SHUTTER MODE *1
SHUTTER SPEED 
SYNCHRO SCAN 
3.GEN-LOCK GEN-LOCK IN 
H.PHASE COARSE 
H.PHASE FINE 
SD HD PHASE CRS(@SD GL) 
SD HD PHASE FINE(@HD GL) 
4.PIX DEFECT(AUTO) AUTO DETECTION 
5.PROTOCOL PROTOCOL 
CAMERA ID ID: 
Depending on the controller which is connected, some of the controller’s setting may take
precedence even when a scene file has been loaded.
When the AK-HRP150G is being used, the AK-HRP150G panel statuses will take
precedence for those items indicated by *1 on the menu list even when a scene file has
been loaded.