Philips FW-V355 - Manual (Page 10)

10
English
3139 115 21372
Controls on the system and
remote control
1 STANDBY ON y
– to switch the system on or to standby mode.
2 SLEEP
– to activate/deactivate or set the sleep timer.
3 DIGITAL SOUND DISPLAY
– the active DSC will be lighted.
4 TUNER (BAND)
– to select waveband : FM or MW.
TAPE (TAPE 1•2)
– to select tape deck 1 or 2.
AUX (CDR/VIDEO)
– to select the input for an additional appliance.
5 VCD 1 / 2 / 3
(VCD.CD 1/2/3 - MP3.CD 1/2/3)
– to select disc tray 1, 2 or 3.
VCD 1 (NTSC/PAL)
– (on the system only) to select corresponding
video output for NTSC or PAL system of your
TV set (except Multi-system TV).
6 OPEN/CLOSE
– to open or close the disc tray.
7 DISC CHANGE
– to change disc(s).
8 DIGITAL SOUND CONTROL (DSC)
– to activate the jog control for DSC selection.
9 Jog control
– to select the desired sound effect for the
selected sound feature.
DSC .................. JAZZ, ROCK, TECHNO or
OPTIMAL.
DBB .................. DBB 1, DBB 2, DBB 3 or
DBB OFF.
0 DYNAMIC BASS BOOST (DBB)
– to activate the jog control for DBB selection.
! Mode Selection
PLAY•PAUSE ÉÅ
for CD/VCD/MP3-CD…to start or interrupt
playback.
for Tape ............... to start playback.
for Plug & Play…(on the system only) to initiate
and start plug & play mode.
SEARCH•TUNING à (ALBUM -)
SEARCH•TUNING á (ALBUM +)
for MP3-CD ..... to select previous/next album.
for VCD .............. to move the zoomed picture to
the left or right.
for CD/VCD .... to search backward/forward.
for Tuner ............. to tune to a lower or higher
radio frequency.
for Tape ............... to rewind or fast forward.
for Clock ............ (on the system only) to set the
hour.
STOP•CLEAR / DEMO STOP Ç
for CD/VCD/MP3-CD…to stop playback or to
clear a programme.
for Tuner ............. (on the system only) to stop
programming or to erase a
selected preset.
for Tape ............... to stop playback or recording.
for Demo ........... (on the system only) to activate/
deactivate the demonstration.
for Clock ............ (on the system only) to exit clock
setting or cancel timer.
for Plug & Play…(on the system only) to exit plug
& play mode.
PREV í / PRESET
4 (TITLE -)
NEXT ë / PRESET 3 (TITLE +)
for MP3-CD ..... to select previous/next title.
for VCD .............. to move the zoomed picture
down or up.
................................. to select next or previous menu
or track during playback (for VCD
with PBC switched on).
for CD/VCD .... to skip to the beginning of the
current, previous, or next track.
for Tuner ............. to select a preset radio station.
for Clock ............ (on the system only) to set the
minute.
Controls
(main system’s illustrations on page 3)
pg 001-034/V355/21-Eng 4/17/02, 1:14 PM 10