Philips FW C255 - Manual (Page 24)

24
English
3139 115 21251
Clock/Timer
TUNER TAPE AUX
BAND TAPE 1 • 2 VIDEO
DIGITAL SOUND DISPLAY
STANDBY-ON
SLEEP
STOP•CLEAR / DEMO STOP
SEARCH •TUNING SEARCH •TUNING PLAY• PAUSE
PRESET▲ NEXT/ PRESET PREV/
▲
CLOCK/ TIMER DIM MODE PROGRAM
DSC
OPEN/
CLOSE
DISC CHANGE
CD
D IG
IT
A L
S O
U N
D
C O
N
T R O L D Y N
A M
IC
B A
S S
B O
O S T
O
P T IM AL JA Z Z
T E C H N O RO
C K
CD 1 CD 2 CD 3
DSC DBB MUTE
2
CD 1/2/3
REPEAT SHUFFLE SLEEP
TUNER TAPE 1/2 AUX/CDR
MUTE NEWS/TA
б б
л н
Е Й З
VOL
MASTER
VOLUME
MIC
MIC
LEVEL
View clock
The clock (if it is set) will be shown in standby
mode.
To view the clock in any source mode
(CD or TUNER for example)
● Press CLOCK/TIMER.
➜ The clock is displayed for a few seconds.
➜ If the clock has not been set, "
--:--" is
displayed.
Clock setting
The clock can be set in either 12-hour or
24-hour mode ("
12:00
AM " or "
00:00" for
example)
1 In standby or view clock mode, press
CLOCK/TIMER once. In other source mode,
press
CLOCK/TIMER twice.
2 Press PROGRAM repeatedly to select clock
mode.
➜ "
12:00
AM " or " 00:00" starts flashing.
3 Press à or á on the system repeatedly to set
the hour.
4 Press í or ë on the system repeatedly to set
the minute.
5 Press CLOCK/TIMER again to store the
setting.
➜ The clock starts working.
To exit without storing the setting
● Press Çon the system.
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
Timer setting
The system can switch on to CD or TUNER
mode automatically at a preset time, serving as
an alarm to wake you up.
IMPORTANT!
– Before setting the timer, ensure that the
clock is set correctly.
– The timer will always be switched on
after it has been set.
– The timer will not start if a recording is in
progress.
– The volume of the timer will increase
gradually from the minimum level to the
last tuned volume level.
1 Press and hold CLOCK/TIMER for more than
two seconds to select timer mode.
➜ "
TU__XX:XX" or "CD__XX:XX" starts
flashing. “ XX:XX" indicates the timer or the last
timer setting.
➜
starts flashing.
pg 001-028_255_21-Eng 12/24/01, 10:57 AM 24