Panasonic DMC-FX3 User Manual

Page 73

Menu Settings

VQT0Y69

• If you select [

], digital zoom, auto

bracket and slow shutter cannot be used.
(DMC-FX07)

• Depending on the brightness and how fast

the subject is moving, jitter may not be
avoided even if [

] is selected.

(DMC-FX07)

• The camera may not be able to detect the

movement of the subject in the following
cases.
– When the moving subject is small
– When the moving subject is at the edge

of the screen

– When the subject starts moving the

instant the shutter button is pressed fully

• ISO sensitivity is automatically set to the

following optimal value in [HIGH SENS.]
(P55) in scene mode.
– [ISO3200] (DMC-FX07)
– [ISO800] to [ISO1600] (DMC-FX3).

• To avoid picture noise, we recommend

decreasing the ISO sensitivity or setting
[PICT.ADJ.] to [NATURAL]. (P78)

• ISO sensitivity cannot be set in the

following cases.
– Simple mode [

]

– Motion picture mode [

]

– Scene mode

Press [

] to display the [REC] mode

menu and select the item to set. (P69)
By changing the aspect ratio, you can
select an angle of view that matches the
subject.

• In motion picture mode [

], you can

select [

] or [

]. (P63)

• The ends of the recorded pictures may be

cut at printing. (P109)

[ASPECT RATIO]

Setting the aspect ratio of pictures

Select to take pictures with the
same aspect ratio as a 4:3 TV or a
PC monitor.

Select to take pictures with the
same 3:2 aspect ratio as 35 mm
film.

This is suitable for landscapes etc.
where a wide view is preferable.
This is also suitable for playing
back pictures on a wide-screen
TV, high-definition TV etc.

/SET

VQT0Y69ENG.book 73 ページ２００６年６月３０日　金曜日　午前１１時７分