Panasonic DMC-FX3 User Manual

Page 22

Preparation

VQT0Y69

[NO.RESET]

Press [

] to display the [SETUP] menu

and select the item to set. (P19)
Set this when you want the file number of
the next recording to start from 0001. (The
folder number is updated and the file
number starts from 0001.)
• A folder number between 100 and 999

can be assigned.
When the folder number reaches 999, the
number cannot be reset. We recommend
formatting the card after saving the data
on a PC or elsewhere.

• To reset the folder number to 100, format

(P90) the built-in memory (DMC-FX3) or
the card first and then use this function to
reset the file number.
A reset screen for the folder number will
then appear. Select [YES] to reset the
folder number.

• Refer to P92 for detailed information about

the file number and the folder number.

• The [NO.RESET] setting also affects

simple mode [

[RESET]

Press [

] to display the [SETUP] menu

and select the item to set. (P19)
The [REC] or [SETUP] menu settings are
reset to the initial settings.
• The birthday setting for [BABY1]/[BABY2]

(P56) in scene mode, the number of days
that have passed since the departure date
for [TRAVEL DATE] (P58) and the
[WORLD TIME] setting (P60) are also
reset when the [SETUP] menu settings
are reset. Also, [FAVORITE] (P80) is fixed
to [OFF] and [ROTATE DISP.] (P81) is
fixed to [ON].

• The folder number and the clock setting

are not changed.

[USB MODE]

Press [

] to display the [SETUP] menu

and select the item to set. (P19)
Select the USB communication system
after or before connecting the camera to
your PC or your printer with the USB
connection cable (supplied).
[

SELECT ON CONNECTION]:

Select either [PC] or [PictBridge (PTP)]
if you connected the camera to a PC or
a printer supporting PictBridge.

[

PC]:

Set after or before connecting to a PC.

[

PictBridge (PTP)]:

Set after or before connecting to a
printer supporting PictBridge.

• When [PC] is selected, the camera is

connected via the “USB Mass Storage”
communication system.

• When [PictBridge (PTP)] is selected, the

camera is connected via the “PTP (Picture
Transfer Protocol)” communication
system.

[VIDEO OUT]

(Playback mode only) (P98)

Press [

] to display the [SETUP] menu

and select the item to set. (P19)
[NTSC]: Video output is set to NTSC

system.

[PAL]:

Video output is set to PAL
system.

/SET

VQT0Y69ENG.book 22 ページ２００６年６月３０日　金曜日　午前１１時７分