Registering cordless telephone, Deregistering cordless telephone, Deregistering cordless tele- phone – Philips PPF685 User Manual
Page 51
Telephone Lines and Additional Devices · Registering and De-Registering Additional Cordless Tele-
EN
GAP Compatible
Registering Cordless Telephone
Registering Cordless Telephone
You must first bring the cordless telephone and then your
device (= base station) in the registration mode to register
a cordless telephone.
1
On the cordless telephone, press [, and using [
select
SETTINGS
.
2
Confirm with OK.
3
Using [ select
ADVANCED SET.
.
4
Confirm with OK.
5
Using [ select
SET HANDSET
.
6
Confirm with OK.
7
Using [ select
REGISTRATION
.
8
Confirm with OK.
9
Confirm with ô
Yes
. The cordless telephone goes
into registration mode.
10
Press OK, 82 and OK on the device.
11
Confirm the preset PIN code (
0000
) using OK.
The cordless telephone is automatically registered. This
process can take a few minutes. Then the number with
which it is registered with the device appears on the display
of the cordless telephone.
Registering other Cordless Telephones
Deregistering Cordless Tele-
phone
You may log off a cordless telephone either using the
device or using the cordless telephone.
On the Device
1
Press OK, 83 and OK.
2
Using [ to select which cordless telephone you are
would like to de-register.
3
Confirm with OK. The device disconnects from the
cordless telephone.
On the Cordless Telephone
1
On the cordless telephone, press [, and using [
select
SETTINGS
.
2
Confirm with OK.
3
Using [ select
ADVANCED SET.
.
4
Confirm with OK.
5
Using [ select
SET BASE
.
6
Confirm with OK.
7
Using [ select
DELETE HANDSET
.
8
Confirm with OK.
9
Using [ to select which cordless telephone you are
would like to de-register.
10
Confirm with OK.
11
Confirm the de-registration with ô
Yes
. The con-
nection with the device is disconnected.
Registering the Cordless Tele-
phone with other Devices
You can register a cordless telephone on four different
devices (= base units).
On the Device
1
Register the cordless telephone with the first device as
described above.
2
Press OK, 82 and OK on the next device.
3
Confirm the preset PIN code (
0000
) or enter a new
PIN code.
4
Confirm with OK.
On the Cordless Telephone
5
On the cordless telephone, press [, and using [
select
SETTINGS
.
6
Confirm with OK.
7
Using [ select
ADVANCED SET.
.
8
Confirm with OK.
9
Using [ select
SET HANDSET
.
10
Confirm with OK.
11
Using [ select
PERSON.REGISTR
.
12
Confirm with OK.
13
Select the next device (= base station) using [.
14
Confirm with OK.
15
Confirm the name of the base unit, or enter a new
name.
16
Confirm with OK.
17
Enter the same pin code which you entered on the
other device.
18
Confirm with OK.
19
Using [ select the number with which you would like
to register the cordless telephone on the device.
20
Confirm with OK.
Notice
GAP Compatible
Additional cordless telephone must be GAP-
compatible.
Notice
Registering other Cordless Telephones
You can register other cordless telephones with
your device in the same manner. If you face any
difficulties in registering, de-register all cordless
telephones, and re-register them individually.
Notice
Identically PIN Codes
The pin code can be identical with the pin
code on the first device.