Philips PPF685 - Manual (Page 16)

16 Philips · PPF 685 · 695
EN
Putting a Call from Cordless
Telephone
Dialling a Number
Dial the desired number. There are several ways to do this:
Then press “.
Direct Dialling
Forwarding Fax to the Device
Manual Dialling: Dial the desired number using the
numeric keypad.
Telephone Book of the Cordless Telephone:
1 Hold m pressed (for at least two seconds).
2 Select an entry using [. Enter the starting letters with
the numeric keypad to quickly navigate through the tel-
ephone book.
Telephone Book of the Device:
1 Press m.
2 Select an entry using [. Enter the starting letters with
the numeric keypad to quickly navigate through the tel-
ephone book.
Redial List: Press and hold @ (at least two seconds).
Use [ to select an entry from the list of the dialled num-
bers.
Caller List:
1 Press [, and using [ to select CALLS .
2 Confirm with OK.
3 Using [, select from which list you would like to dial
a number.
4 Confirm with OK.
5 Select the desired number using [.
Adjusting Volume Level
Looking Up Numbers
Looking Up Numbers
During a call, you can look up the telephone book entries.
1 During a call, press ô Menu .
2 Using [ select PHONEBOOK .
3 Using [, dial the desired entry.
One Menu back
Calling Additional Tele-
phone Functions
Function is not supported in all countries and networks
(Function is not supported in all countries and
networks)
Additional Telephone Functions
You can use additional telephone functions with your
device for example call toggling, three-way call or call for-
warding. Contact your telephone company to inquire
whether or not these functions are available for your con-
nection. The signal to the switchboard to call these services
is a short line interruption (Hook Flash). How to call up
the functions, depends on your telephone company and
may vary from the description found below.
On the Device
Making a Second Call
1 During a call, press R.
2 Enter the desired number using the numeric keypad or
select a saved entry.
Switching Between Calls (= Call Toggling)
Switching Between Calls
Press R, to toggle between the calls.
Receiving a Second Call
Call Waiting
During a call, you can be informed about another call by a
notification tone (= call waiting) if your telephone com-
pany offers this service. The notification tone for call wait-
ing on the device is switched off in the factory.
Receiving a Second Call
During a call, press R to accept the new call.
CLIP Prerequisite
Switching Notification Tone for Call
Waiting On/Off
1 Press OK, 42 and OK.
2 Use [, to select whether you would like to turn the
call waiting on or off.
3 Confirm with OK.
Notice
Direct Dialling
You can also press “ first and then dial a
number. The dialling process begins immedi-
ately.
Notice
Forwarding Fax to the Device
If you receive a call on the cordless telephone
and hear that it is a fax call (whistling tone or
silence), you can start the fax reception on the
device. Press either START on the device or
*5
on the cordless telephone.
Notice
Additional Number
If you have added an additional number to
an entry, this entry appears twice in the tele-
phone book. The symbol of the category
appears before the name.
Notice
Adjusting Volume Level
You can adjust the volume level of the speaker
on the cordless telephone using [ even during
a call.
Notice
Navigating in the Menu
Press õ Return to go back to the previous
menu level.
Notice
Calling Line Identification (CLIP)
For this function to work, the Caller Line Iden-
tification (CLIP) must be activated for your tel-
ephone connection (country and network
dependent). The number and name will not be
shown if the caller suppresses his number.