Planet Technology GSW-2416 - Manual (Page 15)

14
Note
This Gigabit Ethernet Switch does not need software
configuration.
2.2.1 Desktop Installation
To install the Gigabit Ethernet Switch on desktop, simply follow the
next steps:
Step 1: Attach the rubber feet to the recessed areas on the bottom
of the Gigabit Ethernet Switch.
Step 2: Place the Gigabit Ethernet Switch on desktop near an AC
power source.
Step 3: Keep enough ventilation space between the Gigabit Ethernet
Switch and the surrounding objects.
Note
When choosing a location, please keep in mind the
environmental restrictions discussed in Chapter 1, Section
1.4 Product Specifications.
Step 4: Connect your Gigabit Ethernet Switch to network devices.
A. Connect one end of a standard network cable to the 10/100/1000
RJ-45 ports on the front of the Gigabit Ethernet Switch.
B. Connect the other end of the cable to the network devices such as
printer servers, workstations or routers…etc.
Note
Connection to the Gigabit Ethernet Switch requires UTP
Category 5 network cabling with RJ-45 tips. For more
information, please see the Cabling Specification in
Appendix A.
Step 5: Supply power to the Gigabit Ethernet Switch.
A. Connect one end of the power cable to the Gigabit Ethernet Switch.
B. Connect the power plug of the power cable to a standard wall outlet.
When the Gigabit Ethernet Switch receives power, the Power LED
should remain solid Green.