Philips 20HF - Manual (Page 3)

Make sure that air can circulate freely through the ventilation slots
To prevent any unsafe situations, no naked
flame sources, such as lighted candles, should
be placed on or in the vicinity. Avoid heat,
direct sunlight and exposure to rain or water.
The equipment should not be exposed to
dripping or splashing and no objects filled with
liquids, such as vases, should be placed on it.
Insert the aerial plug firmly into the aerial
socket at the bottom rear of the TV.
Connecting the Mains
Insert the mains plug into the wall socket and switch on. Please refer to the label on the back of the
television for the correct operating voltage.
Installing the remote control
• Remove the cover at the back of the
remote control.
• Insert the correct battery type and size
into the compartment making sure that
the polarity orientation is correct.
• You can secure your batteries by
fastening an appropriate screw into the
hole of the battery cover.
Switch the TV on:
Press the power switch on the TV. An indicator on the front of the TV lights up and the screen
comes on. If the TV is in standby mode (red indicator), press the - TV+ keys or the key on the
remote control to switch on the TV.
- 3 -