Philips VR 617/07 - Manual (Page 46)

S
WITCHING THE MODULATOR ON
/
OFF
E
NGLISH
46 46
SSw wiittcchhiinngg tthhee m moodduullaattoorr oonn // ooffff
If picture and sound interference cannot be removed by optimising the
modulator, the integral modulator can be switched off.Warning: this is
only possible if you have connected the video recorder to the TV set
with a scart cable. It is not possible to operate with the modulator swit-
ched off without a scart cable.
FFO ORR
EEX XPPEERRTTSS
6 Confirm the new modulator frequency with
O OK K. In the display there will briefly
appear “OK”.The screen will show “STORED”
SSw wiittcchhiinngg ooffff tthhee m moodduullaattoorr
If you have connected the video recorder to the TV
set with a scart cable, you can switch off the
modulator when there is interference with the
picture or sound (see below).
1 Switch the video recorder on and make sure
there is no cassette in the video recorder
3 The video recorder will now transmit a test
image on this frequency
2 Press simultaneously the SSTTO OPP button h on
the remote control and the
SSTTO OPP//EEJJEEC CTT ? ? button on the front of
the video recorder until the modulator
frequency of the set appears in the display
(e.g.:“M583” for 583 MHz)
4 Use ==PP-- or ;;PP++ to select the option
“MODULATOR”
6 Confirm with O OK K. In the display there will
briefly appear “OK”.The screen will show the
message “STORED”
5 Use P P or Q Q to select the setting “ON”
(Modulator on) or “OFF” (Modulator off)
M 5 8 3
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCYQ583P
MODULATOR ON
EXITPMENU STOREPOK
?