Pride Mobility JET2 User Manual

Page 19

Jet 2/Rev F/Feb03

www.pridemobility.com

I V . Y O U R J E T 2

MANUAL FREEWHEEL LEVERS

For your convenience, your Jet 2 is equipped with two manual freewheel levers. See figures 5 and 6. These levers

allow you to disengage the drive motors and maneuver the chair manually.

WARNING! Do not use your Jet 2 while the drive motors are disengaged unless you are in the

presence of an attendant! Do not disengage the drive motors when your Jet 2 is on an incline.

The chair could roll down on its own, causing injury.

To engage or disengage the freewheel feature:

1. Turn the manual freewheel levers inward to disengage the drive motors. See figure 5.

2. Turn the manual freewheel levers outward, to engage the drive motors. See figure 6.

If a lever is difficult to move in either direction, rock your Jet 2 back and forth slightly. The lever should

then move to the desired position.

CAUTION! It is important to remember that when your Jet 2 is in freewheel mode, the braking

system is disengaged.

Figure 6. Drive Engaged

Figure 5. Drive Disengaged

MANUAL FREEWHEEL LEVERS