Polaris 500 XC SP - Manual (Page 55)

52
PRE-RIDE INSPECTIONS
Start the Engine and Check
n
Engine Stop Switch
Check the auxiliary shut-off switch for proper operation. Push the
switch down to stop the engine. Pull it up to allow restarting.
n
Ignition Switch
Make sure the engine stops when the ignition switch is turned to OFF.
n
Tether Switch
If your machine has a tether switch, remove the tether from the switch to
make sure the engine stops immediately.
n
Lighting
Check the headlight (high and low beam), taillight, and brake light.
Replace burned out lamps before operating.
n
Mirror Adjustment (if equipped)
Adjust the mirrors so they can be used to their full advantage.
n
Operating Area
Before driving away, check your surroundings. Be aware of obstacles
and make sure bystanders are a safe distance from the machine.