PORT SmartConnect Smart Connect Digital Adapter - Manual (Page 5)

W INDOWS NT 4.0
1. Open the My Computer icon (usually located in upper left corner of desktop).
2. Within My Computer screen, click on the CONTROL PANEL icon.
3. Then click MODEM.
4. Highlight the modem you wish to use, then click PROPERTIES.
5. Within modem properties set Maximum Speed to 38400 or 57600 (setting it at
115200 may cause problems)
6. Click on the CONNECTION tab.
7. Uncheck the “Wait for dial tone before dialing” box.
8. Click on the ADVANCED tab.
9. In extra settings type in X3.
10. Continue clicking OK to return to the Dial-Up Networking screen.
11. You are ready to connect. Please see dialing instructions.
S ETUP FOR USE WITH AOL
AOL 3.0
1. Open the AOL Dial-Up window and click SETUP.
2. Within Network and Modem Setup, click CREATE LOCATION.
3. Please enter the following information:
• Location = SmartConnect
• Phone Number = “,,,” (three commas)
• Modem Speed = 38400bps
• Network = AOL Net
4. Click SAVE.
5. Within Network and Modem Setup, click SETUP MODEM.
6. Then click on EDIT COMMANDS. You may be prompted: “Do you wish to delete it
and copy the current profile to the custom profile area?” Click OK.
7. Change Custom Modem Profile Dial Prefix line to ATX3DT.
8. Continue clicking OK until you return to the AOL Dial-Up window.
9. You are ready to connect. Please see dialing instructions .
AOL 4.0
1. Open the AOL Dial-Up window and click SETUP.
2. Within AOL Setup screen, click EXPERT SETUP.
3. Click EXPERT ADD.
4. Please enter the following information:
• Name = SmartConnect
• Edit Number Here = “,,,” (three commas)
• Speed = 57600bps
• Network = AOL Net
5. Click OK.
6. Click DEVICES (modems, etc.) tab.
7. Highlight modem type, then click EDIT.
8. Within the Edit screen, click EDIT COMMANDS.
9. Change Custom Modem Profile Dial Prefix line to ATX3DT.
10. Click OK twice, then click CLOSE and you will return to the AOL Dial-Up window.
11. You are ready to connect. Please see dialing instructions.