Phone Labs Technology Company Phone Labs Dock-N-Talk - Manual (Page 9)

UNIVERSAL DOCKING STATION USER’S GUIDE
9
Docking the Cell Phone Using a Cable Connector
To connect your cell phone to the Dock-N-Talk™, you will need the proper cable
for your cell phone. Verify that the cable will connect to your model of cell phone by
connecting the larger end of the cable to your cell phone. Be sure to power cycle
your phone by turning it off and on before connecting the cable the first time. Then
connect the small end of the cable to the connector on the right side of the Dock-
N-Talk™. When you plug your cell phone into the Dock-N-Talk™ using the correct
cable for your cell phone model, you will see the LED turn from flashing green to
solid green color. That will confirm that the proper connection has been made.
Cell Phone Cable and
Bluetooth Module Connector