Pioneer AVH-P4100DVD - Manual (Page 75)

# You can also perform the same operation by
pressing d (TRACK).
Answering a call waiting
1 Touch to answer a call waiting.
# You can also perform the same operation by
pressing c (TRACK).
2 Touch to end all calls.
# The caller you have been talking to is now on
hold. To end the call, both you and your caller
need to hang up the phone.
# While your callers hold the line, touching
switches between callers.
# You can also perform the same operation by
pressing d (TRACK).
Rejecting call waiting
% Touch to reject a call waiting.
# You can also perform the same operation by
pressing d (TRACK).
Introduction to advanced
operations
1 Touch AV Menu and then touch
Function Menu to display the function
names.
The function names are displayed and oper-
able ones are highlighted.
2 Touch ESC to return to the telephone
standby display.
# To return to the previous display, touch Back.
Connecting a cellular phone
Searching for available cellular phones
1 Touch Phone Connect on the function
menu.
2 Touch Search to search for available cel-
lular phones.
While searching,
Searching flashes. When
available cellular phones featuring Bluetooth
wireless technology are found, device name or
Name Not Found (if names cannot be ob-
tained) is displayed.
# If this unit fails to find any available cellular
phones,
Not Found is displayed.
# You can display the BD address by touching
BD ADDR. To return to the device name, touch
Phone Name.
3 Touch the device name you want to
connect.
While connecting,
Connecting flashes. To
complete the connection, check the device
name (
Pioneer BT unit) and enter the link
code on your cellular phone.
# Up to five peripheral cellular phones are dis-
played.
# PIN code is set to 0000 as the default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 50.
Using a cellular phone to initiate a
connection
1 Touch Phone Connect on the function
menu.
2 Touch Connection Open.
Connection Waiting flashes and the unit is
now on standby for connection from a cellular
phone.
3 Use cellular phone to connect to this
unit.
# To cancel this function, touch
Connection Open again.
# PIN code is set to 0000 as the default. You
can change this code in the initial setting. Refer
to Entering PIN code for Bluetooth wireless con-
nection on page 50.
Disconnecting a cellular phone
1 Touch Phone Connect on the function
menu.
Available accessories
En
75
Section
19
A
vailable
accessories