Pioneer AVH-P4100DVD - Manual (Page 12)

Power ON/OFF
1 1 1
1 Source icon
Turning the unit on
% When using the touch panel keys,
touch the source icon and then touch the
desired source name.
The source names are displayed and select-
able ones are highlighted.
% When using the button, press SRC/OFF
to turn the unit on.
Turning the unit off
% When using the touch panel keys,
touch the source icon and then touch Off.
# When the source icon is not displayed, you
can display it by touching the screen.
% When using the button, press SRC/OFF
and hold until the unit turns off.
Selecting a source
You can select a source you want to listen to.
To switch to the DVD player, load a disc in the
unit.
% When using the touch panel keys,
touch the source icon and then touch the
desired source name.
The source names are displayed and select-
able ones are highlighted.
! Disc – Built-in DVD player
! Radio – Radio
! M-CD – Multi-CD player
! TV – Television
! AV – AV input
! EXT-1 – External unit 1
! EXT-2 – External unit 2
! AUX-1 – AUX 1
! AUX-2 – AUX 2
! USB/iPod – USB/iPod
! Telephone – Bluetooth telephone
! BT-AUDIO – Bluetooth audio player
! XM – XM tuner
! SIRIUS – SIRIUS tuner
! HD Radio – HD Radio tuner
! Rear View – Rear view camera
! Off – Turn the unit off
# When the source icon is not displayed, you
can display it by touching the screen.
# While operating the menu, you cannot select
a source by touching the source icon.
# To close source select menu, touch ESC.
% When using the button, press SRC/OFF
repeatedly to select a desired source.
Notes
! In the following cases, the sound source will
not change.
— When no unit corresponding to the se-
lected source is connected.
— When there is no disc or magazine in the
player.
— When AUX (auxiliary input) is set to off
(refer to page 49).
— When the AV (AV input) is not set to Video
(refer to page 53).
! In the following cases, USB/iPod icon will be
changed.
— USB is displayed when USB storage device
is connected.
— iPod is displayed when iPod is connected.
— USB/iPod is displayed when no device is
connected.
! AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to Switching the auxili-
ary setting on page 49).
Basic Operations
En
12
Section
04