ProForm PFES80040 - Manual (Page 24)

M8 Washer (139)
M8 Large Zinc Washer (74)
M8 Split Washer (140)
M10 Nylon Locknut (81)
M8 Nylon Locknut (102)
M10 Split Washer (114)
M10 x 25mm Button Screw (87)
M10 x 54mm Button Bolt (90)
M10 x 78mm Button Screw (101)
M10 x 75mm Button Bolt (129)
M10 x 78mm Carriage Bolt (149) M10 x 25mm Screw (86)
M10 x 75mm Patch Screw (99)
M8 x 19mm Button Screw (94)
M8 x 36mm Button Bolt (103)
M8 x 40mm Button Screw (142)
M8 x 51mm Button Screw (98)
M6 x 16mm Screw (130)
M4 x 16mm Screw (85)
M4 x 5mm Screw (131)
M10 x 25mm Patch Screw (135)
M10 Large Zinc/Black
Washer (82, 186)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual.
Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.