Multi-level security arming – Python Model 902 User Manual
Page 25
20
© 2 0 0 6 d i r e c t e d e l e c t r o n i c s
chirping the siren and flashing the parking lights. Three
seconds later, the siren output changes to a continuous blast.
This progressive response gives you time to disarm the sys-
tem with your LCD remote if you inadvertently open the
door while the system is armed, while still providing instant
response (even if the door is immediately closed).
➤
Turning on the ignition key will trip the same progressive re-
sponse as opening a door.
➤
The optional starter kill prevents the vehicle’s starter from
cranking.
➤
Any full trigger of the alarm system will immediately send an
alarm page to your remote informing you that your vehicle
should be checked.
multi-level security arming
Multi-Level Security Arming allows you to select which of the
security system's inputs or sensors will be active and which will
be bypassed at the time that the system is armed. (See the Table
of Zones section of this guide.) Pressing
again within five
seconds of arming the security system will activate the Multi-
Level Security Arming feature. Each time
is pressed again, a
different security level is selected. The different security levels
can be selected as follows:
➤
Press
once: The siren chirps once. The system is armed.
➤
Press
a second time within five seconds: The parking
lights flash twice. Zone 2 is now bypassed.
➤
Press
a third time within five seconds: The parking
lights flash three times. Zone 4 is now bypassed.
➜