Tuner listening to the radio 25, Listening to the radio, Tuner – Pioneer AV Receiver/DVD Payer with 6.5 inch Wide Display AVH-P5700DVD User Manual

Page 25

Listening to the radio

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

1 Source icon

Shows which source has been selected.

2 Band indicator

Shows which band the radio is tuned to, AM

or FM.

3 Preset number indicator

Shows which preset has been selected.

4 Frequency indicator

Shows to which frequency the tuner is

tuned.

5 Preset list display

Shows the preset list.

6 LOCAL indicator

Shows when local seek tuning is on.

7 STEREO indicator

Shows that the frequency selected is being

broadcast in stereo.

1 Touch the source icon and then touch

TUNER toselect the tuner.

2 Touch the screen to display the touch

panel keys.

3 Touch BAND to select a band.

Touch BAND repeatedly until the desired band

is displayed, FM1, FM2, FM3 for FM or AM.

4 Toselect a preset channel, touch a pre-

set channel on the list.

The preset channel you selected is tuned in.

# When the list of channels is not displayed,
touch LIST.

5 Toperform manual tuning, briefly

touch c or d.

The frequencies move up or down step by

step.

# You can also perform manual tuning by press-
ing c or d button.

6 To perform seek tuning, keep touching

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly touching
either c or d.
# If you keep touching c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the key.
# You can also perform seek tuning by pressing
and holding c or d button.

Note

If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.

Tuner

Section

Tuner