Pitney Bowes Integra N400 - Manual (Page 3)

3
Location Codes
State Code
Ohio 72
Oklahoma 61
Oregon 72
Pennsylvania 72
Rhode Island 72
South Carolina 50
South Dakota 72
Tennessee 61
Texas 50
Utah 61
Vermont 72
Virginia 61
Washington, DC 72
Washington 84
West Virginia 61
Wisconsin 72
Wyoming 72
State Code
Louisiana 50
Maine 72
Maryland 72
Massachusetts 72
Michigan 72
Minnesota 84
Mississippi 50
Missouri 61
Montana 84
Nebraska 72
Nevada 61
New Hampshire 72
New Jersey 72
New Mexico 50
New York 72
North Carolina 61
North Dakota 84
State Code
Alabama 50
Alaska 06
Arizona 50
Arkansas 61
California 61
Colorado 61
Connecticut 72
Delaware 72
Florida 50
Georgia 50
Hawaii 43
Idaho 72
Illinois 72
Indiana 72
Iowa 72
Kansas 61
Kentucky 61
Result: The scale powers up and displays
the LC (location code) prompt below.
Go to Step 11 to continue.
10
a. Find the number corresponding
to your state in the chart at
right.
b. Enter the code on the numeric
keys.
c. Ensure that the code on the
display matches your state's
code.
d. Press Enter.
Note: Your scale will not work unless you perform this step.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Plug power cord into outlet.
Enter your location code.
The scale displays 0 lb 0.0 oz and the
Select Class arrow flashes. This is the
ready mode.
Note: If the scale does not power-up, check
that the power cord is firmly attached. Also
check that the wall outlet you are using has
power by plugging in another device.
11