Panasonic KX-TDA100 - Manual (Page 8)

Before Operating the Handset
8
Adjusting the Ringer Volume
Adjusting the Ringer Volume or Turning the Ringer Off While Ringing
• For the ringer pattern, see page 31.
• * The adjusted volume level will also be used for subsequent calls.
• If you attach the headset while receiving an incoming call, the ring from the
handset does not switch to the headset. If you attach the headset before
receiving an incoming call, and headset tone is set to on, a tone will be heard
from the headset. If Vibrate is set to on, the handset will vibrate whether a
headset is attached or not.
Press the
Joystick. Press the
Joystick. Select the desired
setting. (Step Up/
Step Down/Level 1-6/Off)
Press the
Joystick.
Select “ Ringer
Volume
”.
Press the Joystick.
OR
Press CANCEL.
Move the Joystick UP or DOWN to adjust the volume.*
While receiving a call
<To adjust the ringer volume>
<To turn the ringer off>