Panasonic KX-TDA100 - Manual (Page 31)

Setting the Handset and Base Unit
31
*
1
When “Ring On Charger” is set to on but “Ringer Volume” is set to off, the handset rings
at level 1.
*
2
The LED pattern does not change when a call is being monitored with the Call Monitor feature.
Main Item Sub Item Description Setting Default
Adjusts the
ringer volume. Step Up
Step Down
Level 1-6
Off
Level 3
Selects whether
a tone is heard
from the
attached
headset while
receiving a call. On
Off
Off
Selects whether
the handset
vibrates while
receiving a call.
Vib.& Ring
Vib.
→
Ring
Off
Off
Selects the
ringing mode
(On or Off) while
a handset is set
on the charger.*
1
On
Off
On
• For tone patterns,
refer to “Ring
Tones” in the Tone
list in Appendix of
the user
documentation for
your PBX.
Selects the
ringer pattern for
each type of call. Bell 1-6
Melody 1-9
Bell 1
Selects the LED
pattern for each
type of call.*
2
Red
Green
Orange
R
→
G
→
O
Single Tone:
Red
Double Tone/
Private Ring:
Green
Triple Tone:
Orange
S-Double Tone:
R
→ G→ O
Selects the
vibrate pattern
for each type of
call. Single
Double
Triple
Short Double
Short Triple
Short Term
Continuous
Single
Incoming Option Ringer Volume
Headset Tone
Vibrate
Ring On Charger
Single Tone
Double Tone
Triple Tone
S-Double Tone
Private Ring
Category 1-9