Panasonic KX-TG5240AL - Manual (Page 89)

Useful Info
rmation
Answering
System
Preparatio
n
89
Troubleshooting
T
e
lephone System
While programming or
searching, the handset or base
unit starts to ring and the
program/search stops. • A call is coming in. To answer the call, press
[
C
], [s] or [SP-PHONE]. Start again from
the beginning after hanging up.
You cannot make an intercom/
outside call. • If more than one other user is using the
handset and/or base unit, you may not be
able to make a call. Try again later.
• Your handset is in remote operation mode
(p. 68). Exit by pressing [OFF].
• The handset you called is too far from the
base unit.
• You cannot make an outside call when the
dial lock is turned on. To turn the mode off,
see page 63.
• Set the dialling mode to “Tone” (p. 23).
You cannot redial. • If the last number dialled was more than 48
digits long, the number will not be redialled
correctly.
• The [REDIAL/PAUSE] button on the base
unit functions as either redial or pause. It will
redial the last number dialled if pressed
before dialling any digits (p. 32). If another
number has been dialled first, it will operate
as a pause button (p. 58).
• You cannot redial when the dial lock is turned
on. To turn the mode off, see page 63.
Problem Cause & Remedy
TG5240AL.fm Page 89 Friday, June 11, 2004 5:22 PM