Pioneer SCSI-2 - Manual (Page 24)

Commands
- 11 -
Applied Model
Applied Model has three values. Each model code corresponds to particular drive models.
I : product models DRM-604X; DRM-1804X; and DR-D504X
II : product model DRM-602X
III : product models DRM-624X; DR-U124X; DR-UA124X; DR-A10X; DR-U10X;
DR-A12X; DR-411; DR-U12X; DR-433; DR-A24X; DR-511; DR-U24X; and
DR-533
Each command is either supported by a drive, indicated by “yes”, not supported by a drive, “---“,
or is supported but with restrictions and/or conditions, “N” where N is a numeric value 1-7.
yes : is supported by all drives corresponding to this Applied Model code.
--- : is not supported by any of the drives corresponding to this Applied Model code.
1 : is not supported by DRM-1804X.
2 : does not support the media type code 4h, 8h, 70h, 71h and 72h. There is limited
action in the CD-ROM Audio Controller Parameter Page (0Eh).
3 : random access is possible with CD-DA data. Buffer Over Flow Error would not
occur. For SUB-CHANNEL READ OUT, support is only when the Beginning
Logical Block Address is FFFFFFFFh and Sub-Channel data. It is unable to
choose the Beginning Logical Block Address or to read out along with other
data.
4 : is not supported by Format Field = 2 (all of Q Sub-Code information).
5 : is not supported by DR-UA124X.
6 : is unable to reassign disc of single type drive.
7 : is not supported by DR-A10X, DR-U10X, DR-411, DR-433, DR-A12X, DR-
U12X, DR-444, DR-466, DR-A24X, DR-U24X, DR-511 and DR-533.