Pioneer SCSI-2 User Manual

Page 139

CD-ROM SCSI-2 COMMAND REFERENCE MANUAL VERSION 3.1 (OB-U0077C)

- 126 -

Table 2-31C Supported additional sense codes and additional sense code qualifiers (continued)

ASC

ASCQ

DESCRIPTION

logical block address out of range

invalid field in CDB

logical unit not supported

invalid field in parameter list

parameter not supported

parameter value invalid

threshold parameters not supported

not ready to ready transition (medium may have changed)

power on, reset or bus device reset occurred

parameters changed

mode parameters changed

log parameters changed

copy can not execute since host can not disconnect

command sequence error

commands cleared by another initiator

incompatible medium installed

can not read medium - unknown format

can not read medium - incompatible format

rounded parameter

saving parameters not supported

medium not present

invalid bits in identify message

logical unit has not self-configured yet

target operating conditions have changed

micro code has been changed

changed operation definition

inquiry data has changed

diagnostic failure on component NN (80h-FFh)

message error

internal target failure

select or reselect failure

unsuccessful soft reset

SCSI parity error

initiator detected error message received

invalid message error

command phase error

data phase error

logical unit failed self configuration

overlapped commands attempted

media load or eject failed

medium removal prevented

unable to recover TOC

operation request or state change input (unspecified)

operator medium removal request

log exception

threshold condition met

log counter at maximum

log list codes exhausted

end of user area encountered on this track

illegal mode for this track