Pitco Frialator Solstice supreme with Matchless Ignition (Built after 08/2000) - Manual (Page 32)

TROUBLESHOOTING
32 L20-378 rev.3 (01/13)
1- SCBS Reset Button
3.5. RESETTING THE SELF CLEANING BURNER SYSTEM TEMPERATURE LIMIT SWITCH
1. Turn the appliance off.
2. Allow the appliance ample time to cool to room
temperature.
3. Press the SCBS high limit reset button. The reset
button is located behind the front panel at the top
of the main burners.
4. The SCBS high limit switch is now reset and
ready for startup.
5. If the SCBS high temperature limit switch
continues to trip, have the appliance inspected by
an Authorized Professional.
Event Duration Indication
Turn appliance “ON” N/A
Control Illuminates, pilot sparks and ignites. Pre-Purge
pulse is initiated.
Pre-Purge Pulse 2 seconds Appliance operates briefly and stops. Pilot remains lit.
Interwaiting period 1 5 seconds Appliance does not operate. Pilot remains lit.
Cleaning Pulse 6 seconds
Main valve operates, lighting main burners. SCBS valve
operates, feeding gas to the SCBS Arm. The SCBS arm
ignites, initiating a brief burn at the main burner orifice of
each burner.
Interwaiting period 2 8 seconds
The Main and SCBS valves de-energize for this period.
The pilot remains lit.
Normal operation
resumes
N/A
The appliance operates normally and begins to heat up.
The SCBS Valve remains de-energized until power to
the appliance is recycled. There is no flame on the
SCBS Arm. There is no burn at the main burner orifices.