Panasonic KX-TCD515E - Manual (Page 63)

Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 63
Cordl
ess Tel
e
phone
Multi-Unit User Operations
Handset Registration to a Base Unit
The handset supplied with the base unit is already registered. If an optional handset is
purchased, it must be registered as follows.
Charge the optional handset batteries for 7 hours before initial use.
Handset registration must be completed within 1 minute after pressing the
.
If over 1 minute, press then start over again.
To exit the operation, press at any time.
• If you enter the incorrect Base Unit PIN, the error tone sounds and repeat from step 1.
• To register an handset to more than one base unit, repeat from step 1 with the other
base unit(s).
• The handset main menu may changes corresponding to the base unit registered to.
1 Press JOYSTICK
(or move). 2 Select “
Setting
Handset
”.
3 Select
“Registration”.
4 Select “Register
H/set
”.
5 Press and hold on the Base Unit (for about 3
seconds) until the tone sounds.
• If all registered handset(s) start ringing (paging), press
to stop paging then start over again.
6 Select the desired
base unit. 7 Enter 4-digit Base Unit
PIN.
(Factory Preset 0000) 8 Press JOYSTICK.
When a handset is registered successfully, a confirmation tone sounds and the “ ”
icon is displayed.
515E_E.book Page 63 Friday, June 27, 2003 2:23 PM