Panasonic KX-TCD515E - Manual (Page 48)

48
Handset Settings
Setting the Ringer Volume
The choices are 6 levels and off. If you set the volume to OFF, “ ” is displayed,
however, still the volume of a paging and intercom call are level 1.
• The factory preset is 6.
Selecting the Ringer Pattern for External Call/Internal Call/Paging
• The factory preset is 1.
Selecting the Ringer Pattern for Private Ring
• The factory preset of each ringer pattern is 1.
1 Press JOYSTICK
(or move). 2 Select “
Setting
Handset
”.
3 Select “Ringer
Option
”.
4 Select “Ringer
Volume
”
.
5 To increase volume, move
the JOYSTICK up.
To decrease volume,
move the JOYSTICK
down. 6 Press
JOYSTICK.
Follow steps 1 to 3 shown above, then:
4 Select “EXT Ringer Type”, “INT
Ringer Type
” or “Paging Tone”.
5 Select the desired ringer pattern.
Follow steps 1 to 3 shown above, then:
4 Select “Private
Ring
”.
5 Select the desired
category. 6 Select the desired
ringer pattern.
515E_E.book Page 48 Friday, June 27, 2003 2:23 PM