Panasonic KX-TCD515E - Manual (Page 33)

Helpline Tel.No. :U.K. 08700 100 076 R.O.I. 01289 8333 33
Cordl
ess Tel
e
phone
SMS Feature (Text Message)
Entering a Number from the Caller ID List
Entering a Number from the Redial List
• “Sending Message” is displayed after step 8. The display returns to the standby
mode, then “Transferring Message” is displayed.
• If the base unit does not have sufficient memory to send a message, the display will
show “SMS lists are memory full. Delete messages.”. The unit will then
return to the function menu.
• Once you have created a SMS message, the unit will display “
W
Use Last Text?
”
each time you select “Create”. If you want to use the text of the last message sent
once again, move the JOYSTICK up to recall the last message.
• If you try to send a message using a phone number (Destination) over 20 digits long
from one of the Phonebook, Caller ID or Redial lists, “Invalid Number” is displayed
and the display returns to “”.
• The maximum message length is 160 characters. Please consult your SMS service
provider for further details.
• 69 messages can be memorized when you enter 80 characters/1 message.
• If your phone is connected to PBX (Private Branch eXchange: private branch
exchange), see page 42 to enter the destination number.
Follow steps 1 to 5 on the previous page, then:
6 Select the desired item.
twice
Go to step 7.
Follow steps 1 to 5 on the previous page, then:
6 Press RIGHT SOFT
KEY. Select the desired item.
twice
Go to step 7.
Follow steps 1 to 6 on the previous page and above, then:
7 “Save?” is displayed, then select
“Yes” or “No”. (If “Yes” is selected,
“Saved Message” is displayed.) 8 Select “Send”.
515E_E.book Page 33 Friday, June 27, 2003 2:23 PM