beautypg.com

Connecting up 02 – Pioneer XV-HTD340 User Manual

Page 15

background image

Connecting up

02

15

En

Watching progressive scan video from
the component video outputs

Compared to interlace video, progressive scan
video effectively doubles the scanning rate of
the picture, resulting in a very stable, flicker-
free image. Progressive scan video is available
only from the component video output. There
are a few things to keep in mind when
switching the

Component Out

(page 63)

setting to

Progressive

:

• When set to

Progressive

, there is no video

output from the

VIDEO OUT

(composite)

and

S

(S-video) jacks.

• If you want to display video on more than

one monitor simultaneously, make sure
the player is set to

Interlace

.

• If you connect a TV that is not compatible

with a progressive scan signal and switch
the setting to

Progressive

, you will not be

able to see any picture at all. In this case,
press

STANDBY/ON

to put the system

in standby, then press and hold the front
panel

(stop) button for about 8 seconds

until the display shows

Mem.Clr.?

. Press

the front panel

or

button

so that the display shows

Interlace?

. Press

the front panel

button to set to

interlace and switch the system back on.

Compatibility of this player with
progressive-scan and high-definition
TVs.

This player is compatible with progressive
video Macro Vision System Copy Guard.

Consumers should note that not all high-
definition television sets are fully compatible
with this product and may cause artifacts to be
displayed in the picture. In case of 525
progressive scan picture problems, it is
recommended that the user switch the

connection to the ‘standard definition’ output
(Interlace). If there are questions regarding our
TV set compatibility with this model, please
contact our customer service center.

This system is compatible with the following
Pioneer displays and monitors:

Plasma display

PDP-505HD, PDP-5030HD, PDP-4330HD,
PDP-5040HD, PDP-4340HD, PRO-10000HD,
PRO-800HD, PRO-1000HDI, PRO-800HDI,
PRO-1110HD, PRO-910HD, PDP-4300, PDP-
5031

Projection monitor receiver

SD-533HD5, SD-643HD5, PRO-710HD, PRO-
610HD, PRO-510HD, PRO-720HD, PRO-
620HD, PRO-520HD, PRO-730HD, PRO-
630HD, PRO-530HD, PRO-730HDI, PRO-
530HDI

02_Connecting_Up.fm 15 ページ 2003年12月27日 土曜日 午前11時52分

This manual is related to the following products: