Powermatic PM3000 - Manual (Page 6)

6
Introduction
This manual is provided by Walter Meier (Manufacturing) Inc., covering the safe operation and
maintenance procedures for a Powermatic Model PM3000 Cabinet Saw. This manual contains
instructions on installation, safety precautions, general operating procedures, maintenance instructions
and parts breakdown. This machine has been designed and constructed to provide years of trouble free
operation if used in accordance with instructions set forth in this manual. If there are any questions or
comments, please contact either your local supplier or Walter Meier. Walter Meier can also be reached at
our web site: www.waltermeier.com.
Specifications
Model number ......................................................................................................................... PM3000
Stock Number ...................................................................................................................... 1720305K
Motor ...................................................................... TEFC, 7.5HP, 3Phase, 230/460V (pre-wired 230V)*
Table size with standard extensions (L x W/in.)............................................................................48 x 38
Table size without extensions (L x W/in.) .....................................................................................26 x 38
Arbor diameter (in.) ............................................................................................................................. 1
Saw blade diameter (in.) ................................................................................................................... 14
Arbor speed (RPM) ....................................................................................................................... 3450
Left tilt range (deg.) ....................................................................................................................... 0–45
Maximum depth of cut (in.) ........................................................5-1/8 at 90-degrees; 3-1/2 at 45-degrees
Maximum diameter of dado (in.)........................................................................................................... 8
Maximum width of dado cut (in.) ................................................................................................... 13/16
Maximum rip to right of blade (in.) ...................................................................................................... 50
Maximum rip to left of blade (in.) ........................................................................................................ 14
Table surface in front of saw blade at max. depth of cut (in.) .......................................................... 15-1/2
Drive system ....................................................................................................................... Poly-V Belt
Table height to floor (in.) ................................................................................................................... 35
Dust port diameter (in.) ....................................................................................................................... 4
Minimum dust collection required (CFM) .......................................................................................... 350
Approximate weight, complete kit:
Net Weight (lbs.) ....................................................................................................................... 750
Shipping weight (lbs.) ................................................................................................................ 820
Approximate weight, saw only (minus fence, rails, wood extension table and legs):
Net Weight (lbs.) ....................................................................................................................... 610
Shipping (lbs.) ........................................................................................................................... 695
* 460V operation requires additional purchase of 460V switch (stock no. PM3000-282A)
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier reserves the right to change specifications at any time and without
prior notice, without incurring obligations.
Read and understand the entire contents of this manual before attempting
assembly or operation! Failure to comply may cause serious injury