Philips WP3820 - Manual (Page 7)

Warning
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
Before use
To prevent quick clogging of the filter cartridge, let the water run at
the unfiltered setting for around 5 seconds before every use.
If the water is highly coloured or turbid due to work on your water
network, do not let the water run at the filtered setting until the
water is clear.
Let the water run at the filtered setting for 10 seconds before the
first use of the day.
Let the water run at the filtered setting for 60 seconds before use if
you have not used the water purifier for more than two days.
If you have not used the water purifier for more than two weeks, let
the water run at the filtered setting for 2-3 minutes before use. If the
filter cartridge emits an unpleasant smell, replace it with a new one.
Water temperature
Do not let water hotter than 50°C run through the water purifier,
because this may damage the appliance.
Do not let the water purifier freeze.
Battery
To prevent that the battery leaks, overheats or explodes:
Do not disassemble the battery.
Do not charge the battery.
Do not use a damaged battery.
Do not expose the battery to water or high humidity levels.
Do not expose the battery to direct sunlight, high temperatures or
fire.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
English