Philips SPF4308 User Manual
Page 8
7
Connect power
Note
When you position the PhotoFrame, ensure
•
that the power plug and outlet are easily
accessible.
1
Connect the power cord to the DC
socket of the PhotoFrame.
2
Connect the power cord to a power
supply socket.
A few seconds later, the PhotoFrame
»
turns on automatically.
3 Get
started
Caution
Use the controls only as stated in this user
•
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Install the stand
To place the PhotoFrame on a flat surface,
attach the supplied stand to the back of the
PhotoFrame.
1
Insert the stand into the PhotoFrame and
position the indication on the stand to
the position.
2
Turn the stand anti-clockwise 45 degrees
to the position and lock it to the
PhotoFrame firmly.
English
EN