Philips SPF4308 - Manual (Page 10)

9
To copy photos to the PhotoFrame:
1
Select [Yes], and then press OK.
• To remove a storage device, pull it out of
the PhotoFrame.
Transfer photos with a computer
Caution
Do not disconnect the PhotoFrame from the •
computer during media transfer.
1
Connect a USB cable to the PhotoFrame
and to the computer.
You can drag and drop the media from
»
the computer to an album on the
PhotoFrame.
2
When the transfer is complete,
disconnect the USB cable from the
computer and the PhotoFrame.
Tip
You can transfer media from the PhotoFrame •
to a computer.
The transfer speed depends the operating •
system and the software configuration of the
computer.
Transfer media
Transfer photos with a storage device
Caution
Do not disconnect the storage device from the •
PhotoFrame during media transfer.
The PhotoFrame supports most types of the
following storage device:
Secure Digital (SD) •
Secure Digital High Capacity (SDHC) •
Multimedia Card (MMC) •
Memory Stick (MS) •
Memory Stick Pro (MS Pro) (with •
adaptor)
1
Insert a storage device into the
PhotoFrame.
An option menu is displayed.
»
[Play Photos]: Select it to play media
on the storage device
[Browse]: Select it to browse media
on the storage device
[Copy to PhotoFrame]: Select it to
start transfer operation
2
Select [Copy to PhotoFrame], and then
press OK.
A confirmation message is displayed.
»
English
EN