Planet Technology GSD-Series - Manual (Page 12)

12
2.2.1 Desktop Installation
To install the Switch on desktop, simply follow the next steps:
Step 1: Attach the rubber feet to the recessed areas on the bottom of the Switch.
Step 2: Place the Switch on desktop near an AC power source.
Step 3: Keep enough ventilation space between the Switch and the surrounding
objects.
Note: When choosing a location, please keep in mind the environmental
restrictions discussed in Chapter 1, Section 1.4 Product Specifications.
Step 4: Connect your Switch to network devices.
A. Connect one end of a standard network cable to the 10/100/1000 RJ-45 ports
on the Back of the Switch.
B. Connect the other end of the cable to the network devices such as printer serv-
ers, workstations or routers…etc.
Note: Connection to the Switch requires UTP Category 5 network cabling with
RJ-45 tips. For more information, please see the Cabling Specification in
Appendix A.
Step 5: Supply power to the Switch.
A. Connect one end of the power cable to the Switch.
B. Connect the 12V DC power adapter to a standard wall outlet.
When the Switch receives power, the Power LED should remain solid Green.