ProForm 785 TL User Manual

Page 19

Erasing Channels

After all channels available in your area have been set
into memory, you can erase unwanted channels by fol-
lowing the steps below:

1. Select the unwanted channel by using the CHANNEL

Æ or

button or the channel selection buttons.

2. Press the MENU button to

turn on the pop up menu.
Press the MENU button
again to select CH MEM-
ORY.

3. Press the + or Ð button to

move the arrow to MEM-
ORY ADD¥ERASE. Select
MEMORY ADD¥ERASE by
pressing the MENU but-
ton.

4. Press the Ð button to

erase the stored channel
from memory. The channel
number will change from
green to red.

Adding Channels

Channels that are not in memory can be stored manu-
ally. To manually store a channel, follow the steps
above, but press the + button when MEMORY ADD¥
ERASE is selected. The channel will be stored in mem-
ory, and the channel number will change from red to
green.

Manually Searching for and Storing Channels

1. Press the MENU button to

turn on the pop up menu.
Press the MENU button
again to select CH MEM-
ORY.

2. Press the + or Ð button to

move the arrow to
SEARCH/SKIP. Select
SEARCH/SKIP by press-
ing the MENU button.

3. Press the Ð button to se-

lect the SEARCH mode.
The TV will return to the
normal screen after four
seconds.

4. Press the CHANNEL Æ or

button to start search-

ing. It will stop whenever an available channel is
found.

5. If you do not want to store the channel in memory,

press the CHANNEL Æ or

button again. To store

the channel in memory, refer to ADDING CHAN-
NELS at the left.

6. Until all desired channels have been stored, return to

SEARCH/SKIP as described above and press the +
button to return to the SKIP mode.

CHANNEL UP/DOWN

SKIP

[ + ]

[ Ð ]

CH MEMORY
ANALOG
CLOCK/TIMER

AUTO MEMORY
SEARCH/SKIP
MEMORY ADD

¥ERASE

TV/CATV

CHANNEL MEMORY
END

ERASE