Maintenance – Philips AZ 1018 User Manual
Page 11
Tape deck maintenance
To ensure quality recording and playback of
the tape deck, clean parts A, B and C
shown in the diagram below, after approx.
50 hours of operation, or on average once
a month. Use a cotton bud slightly
moistened with alcohol or a special head
cleaning fluid to clean the deck.
1 Open the cassette door by pressing
STOP•OPEN
9/.
2 Press PLAY
1 and clean the rubber
pressure roller C.
3 Press PAUSE
; and clean the magnetic
heads A, and also the capstan B .
4 After cleaning, press STOP•OPEN
9/.
– Cleaning of the heads can also be done by
playing a cleaning cassette through once.
CD player and CD handling
• The lens of the CD player should never be
touched!
• Sudden changes in the surrounding
temperature can cause condensation to
form and the lens of your CD player to
cloud over. Playing a CD is then not
possible. Do not attempt to clean the lens
but leave the set in a warm environment
until the moisture evaporates.
• Use only Digital Audio CDs.
• Always close the CD door to keep the CD
compartment dust-free.To clean, dust the
compartment with a soft dry cloth.
• To take a CD out of its box, press the
centre spindle while lifting the CD. Always
pick up the CD by the edge and replace
the CD back in its box after use to avoid
scratching and dust.
• To clean the CD, wipe in a straight line from
the centre towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.
• Never write on a CD or attach any stickers
to it.
Maintenance
14
English
A
B
C
Environmental information
All unnecessary packaging material has been omitted.The packaging can be easily
separated into three materials: cardboard, polystyrene and plastic.
Your set consists of materials which can be recycled if disassembled by a specialized
company. Please observe the local regulations regarding the disposal of packing
materials, exhausted batteries and old equipment.
XP AZ 1018/00-1 13-12-2000 11:55 Pagina 14