Philips DVD615AT98 - Manual (Page 34)

34 Video Output, Video Mode
Video Mode
Just as you can adjust your picture on your TV, you can adjust some pic-
ture elements at the Player. Choose a picture setting that best displays the
Disc you are playing.
1 Press SYSTEM MENU.
2
Press 9 repeatedly to select SETUP VIDEO OUTPUT,
then press OK.
3 Press 9 repeatedly to select VIDEO MODE, then press -.
4
Press 8 or 9 to select BRIGHT, STANDARD, SOFT, or
PERSONAL, then press OK. Continue to step 5 on page 35.
TV TYPE
VIDEO OUTPUT
TV DISPLAY
VIDEO MODE
F BRIGHT
BRIGHTNESS STANDARD
CONTRAST SOFT
SATURATION PERSONAL
MAIN PAGE
- - VIDEO OUTPUT PAGE - -
2-4
Video Output
If you used S-Video or Component Video connections as described on pages
11-12, set VIDEO OUTPUT to S-VIDEO or YPBPR (for Component Video)
by following the steps below. You only need one video connection between
the TV and the Player. You cannot use S-Video and Component Video at the
same time.
If you used the yellow VIDEO (VIDEO OUT) jack on the Player to connect
the Player to the TV, you do not need to adjust the VIDEO OUTPUT setting.
1 Press SYSTEM MENU.
2 Press 9 repeatedly to select SETUP VIDEO OUTPUT, then
press OK.
3 Press 9 to select VIDEO OUTPUT, then press -.
4 Press 9 or 8 to select S-VIDEO or YPBPR, then press OK.
Choose S-VIDEO if you connected the Player’s S-VIDEO (VIDEO
OUT) jack to the TV’s S-Video In jack as described on page 11.
Choose YPBPR if you connected the Player’s Y Pb Pr (VIDEO OUT)
jacks to your TV’s Component Video In jacks as described on page 12.
5 Press SYSTEM MENU to remove the menus.
1,5
2-4
- - VIDEO OUTPUT PAGE - -
TV TYPE
VIDEO OUTPUT
F S-VIDEO
TV DISPLAY YPBPR
VIDEO MODE
BRIGHTNESS
CONTRAST
SATURATION
MAIN PAGE
1