Philips DVD615AT98 - Manual (Page 30)

30 Programmed Playback
You may play Tracks in an order you specify instead of playing the Tracks
in normal order (1, 2, 3, etc.). The order in which you set the Tracks to
play is a Program. For example, if you want to set up an Audio CD so
Track 12 will play first, put Track 12 in Program position number one (1).
To set up a Program, follow these steps.
1
Press SYSTEM MENU.
2 GENERAL SETUP will be selected. Press OK.
3 Press 9 to select PROGRAM, then press - to select ON.
You cannot select PROGRAM when a DVD is in the Player.
4 Press OK. The PROGRAM PLAY PAGE will appear. This is where
you enter the Track numbers in the order in which you want to
play them. The Number 1 space will be selected automatically as
your starting point.
While the Number 1 space is highlighted, press the
Number buttons to enter the Track number you want to
play first. The Track number will appear in the box beside the
number 1.
5 Use the 8, 9, ;, : buttons to move to the next Program
position, then use the Number buttons on the remote con-
trol to enter your other Tracks. Repeat this process until
you have entered all the Tracks you want in the Program.
If you enter an incorrect Track number in one of the previous
Program positions, press 89 ; : to select the Program position.
Press any Number button to clear the box. Use the Number but-
tons to reenter the correct Track number you want.
6
When you have entered all the Tracks you want in the
Program, press 9, ;, and/or : to select PROG at the bot-
tom of the PROGRAM PLAY PAGE. Then, press OK. This
will store the Tracks in the Program. The Program may start playing
automatically. If not, press PLAY - to start playing the Program.
The Program will play repeatedly until you stop playback.
To resume normal playback, press STOP C twice to stop playing
the Program. When you press PLAY -, Tracks will play in normal
order again, starting at the beginning of the Disc.
PLEASE INPUT 001 - - - 029
1 12 5 9
2 6 10
3 7 11
4 8 12
CLEAR PROG QUIT
PROGRAM PLAY PAGE
2-6
DISC LOCK
PROGRAM
F ON
VFD DIM
OSD LANG
SCR SAVER
MAIN PAGE
- - GENERAL PAGE - -
• You can enter a maximum of
96 Tracks in a Program. To
access the PROGRAM PLAY
PAGES for positions 13-96,
press Previous
4 or Next
¢ .
• To erase all the Tracks from the
Program, press 9 and/or ; to
select CLEAR at the bottom of
the PROGRAM PLAY PAGE,
then press OK. This clears all
the Program positions.
• To stop entering Tracks in the
Program, press 9 and/or : to
select QUIT at the bottom of
the PROGRAM PLAY PAGE,
then press OK. When you play
the Disc, Tracks will play in nor-
mal order (1, 2, 3, etc.).
• The Program will accept a Track
number only if it is available on
the current Disc.
Helpful Hints
1
4-5
AUDIO CD VIDEO CD