Philips CD140 - Manual (Page 13)

Getting started 11
Slide out the battery cover
Place the batteries as
indicated in the battery
compartment and replace
the battery cover.
3.3 Place the handset on
the charging cradle
Charge the handset for at least
24 hours before using it for the
first time.
When the battery is fully
charged, the talk time of your
CD140 is approximately 12
hours and the standby time is
approximately 120 hours.
Place the handset on the
charging cradle of the base
station.
When the handset is fully
charged,
is displayed.
3
1
2
1
Connect the other end of the
line cord to the telephone line
socket and the other end of
the power cable to the
electricity socket.
Note
The line adaptor may not be
attached to the line cord. In
this case, you have to connect
the line adaptor to the line
cord first before plugging the
line cord to the line socket.
3.2 Install rechargeable
batteries
Your CD140 is supplied with
two rechargeable batteries.
Before using the handset, install
the batteries into the handset
and fully charged them up.
3