Philips RD 0525C - Manual (Page 6)

– 5 –
HOW TO USE THE TV
DISPL AY
CHAN NEL AC ❆ DC COM PACT C OLOR T V
VOLU ME
VH F
UH F
C H .
C H .
2 4 6 7 9
11 13
14 20 30 40 50 60 70 83
V U
PO WE R
PH ON E
5
4 6
6
2
3
INPUT
TV
VIDEO
VIDEO
AUDIO
EXT.ANT. TINT COLOR CONTR BRIGHT
DC 12 – 15V
1
REAR
1. Slide the TV/Video Selector to TV position.
2. Press the Power Button to turn on the TV.
3. Press the TV Band Select Button to select the desired channel band
VHF (channels 2 – 13) or UHF (channels 14 – 83).
4. Press the Channel ▲ ▼ Buttons until the desired TV channel is
reached.
• When you press the Channel ▲ or ▼ Button, the CH Indicator
Line will appear on the screen above the Channel scales. The CH
Indicator Line will move across the screen to indicate the selected
TV channel. After the desired TV channel is reached, the CH Indi-
cator Line will disappear from the TV screen.
CH Indicator
Red Line
VHF (channels 2–13)
TV
Screen
CH Indicator
Green Line
UHF (channels 14–83)
TV
Screen
• Holding down the Channel ▲ or ▼ Button will scan through all of
the available channels (in the selected band).
• The CH Indicator Line will be at the left side of the screen each
time the TV is turned on. Just press the Channel ▲ Button to se-
lect the desired channel.
• The CH Indicator Line may not stop at a channel if the signal is
weak. In this case, adjust the Indoor Rod Antenna and try to select
the channel again by pressing the Channel
▲ ▼ Buttons.
HOW TO WORK YOUR TV