beautypg.com

Operation, Radio operation – PYLE Audio PLCDCS300 User Manual

Page 7

background image

7

Stations are searched automatically
from next frequency and detected
station is stored into the preset
memory. In case of LOC state, the
first Auto Store is done by LOC state
and if 6 CH is not fully memorized,
the seconds Auto Store search
continued by Distant state. At the
end of Auto Store operation, mode
is change to Preset Scan.

- Preset Scan

Press AS/PS button (14) shortly in
radio mode, Preset Scan is started.
This operation starts from next
preset number and finished at the
same preset number of which last
channel memory stored.
Frequency of preset memory is
displayed with blinking for 5
seconds. Press AS/PS button (14)
again to release this function.

• STATION STORING

Press and release any one of the
preset buttons (18) (1 - 6) shortly,
(1 - 6) preset memory is called (Preset
Call). Press the button for several
secnds, current frequency is stored
into preset memory and preset number
(1 - 6) is displayed (Preset Store).

OPERATION

RADIO OPERATION

• BAND SELECTION

At radio mode, press BAND button
(13) to select the desired band.
The reception band will change in the
following order:

• STATION SELECTION

- Manual Tune Up/Down

Repeatedly press the
TUNE/TRACK/SKIP button (16)
or TUNE/TRACK/SKIP button
(17) for manual tuning frequency
downward or upward.

- Seek Tune Up/Down

Press and hold the
TUNE/TRACK/SKIP button (16)
or TUNE/TRACK/SKIP button
(17) for several seconds for auto
tuning frequency downward or
upward.

• LOCAL/DISTANT

Press LOC button (1) shortly to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations. In local
mode, “LOC” will display.

• MONO/STEREO

At FM radio mode, press MO/ST
button (8) to set the reception between
mono mode and stereo mode.
In stereo mode, when stereo
broadcasting station is received, the
“ ” indicator will appear upon the
display.

• AUTOMATIC MEMORY STORING &

PRESET SCAN

- Automatic Memory Storing

Press AS/PS button (14) over 1
second in radio mode, Auto Store is
started.

FM1

FM2

FM3

AM1

AM2