PYLE Audio PLCDCS300 - Manual (Page 11)

11
GENERAL
Power Supply Requirements : DC 12 Volts, Negative Ground
Chassis Dimensions : 200 mm (W) x 138 mm (D) x 100 mm (H)
Loading Impedance : 4 - 8
Ω per channel
Maximum Output Power : 4 x 50 Watts
Current Drain : 10 Ampere (max.)
CD PLA YER
Signal to Noise Ratio : More than 55 dB
Channel Separation : More than 50 dB
Frequency Response : 20 Hz - 20 KHz
CASSETTE PLA YER
Tape Speed : 4.76 cm/sec
Fast Forward Time : 180 seconds (C-60 type)
Frequency Response : 50 to 8,000 Hz
Channel Separation : > 35 dB
Crosstalk : > 40 dB
Wow and Flutter :
≤ 0.35% WRMS
RADIO
FM
Frequency Coverage : 87.5 to 107.9 MHz
I.F. : 10.7 MHz
Sensitivity (S/N = 30 dB) : 3
µV
Image Rejection : > 45 dB
Stereo Separation : > 30 dB
AM
Frequency Coverage : 530 to 1710 KHz
I.F. : 10.71 MHz
Sensitivity (S/N = 20 dB) : 32 dBu
SPECIFICATIONS