Pioneer BDP-LX91 - Manual (Page 7)

Confidential Pioneer
3.2.4 Command string termination
When the code is received, this terminates the command.
3.2.5 Command processing
Buffered commands are extracted in order and the operation is started.
Once execution of the command is fully completed, the "Completed" message (R) is sent.
If or (line feed) is included in the received command string, it is ignored.
If the command is unusable, the error message in 3.3.7 is sent.
If an error is generated, subsequent commands are not executed.
3.2.6 "Completed" message
"Completed" messages used with the auto status function are expressed "R".
3.2.7 Error messages
Error messages are expressed as "E" followed by a two-digit error code.
Example: E04
Error messages are returned when the issued command cannot be executed, obstructing continued
control.
3.2.8 Exception processing
If a different command is received while executing another command, execution of the previous
command is interrupted and the new command is executed.
3.2.9 Request status
Commands including a "?" indicate a request status. Information associated with the command is sent,
terminated with and returned.
If multiple request commands are issued within the command string, a status terminated by is
returned for each.
Example: ? R? C → 01
05
7